OPF-M17, ACRO, RSD is precision machined from 4140 steel, and QPQ coated. Aimpoint ACRO P1/P2 requires the plates to adhere to Aimpoint ACRO TDP with tight tolerances, OPF-M17, ACRO, RSD has proven to be the best choice among professional users. OPF-M17, ACRO, RSD is compatible with MIL issued M17/M18. It is a drop in adapter for superb Aimpoint ACRO sights. It is identical to the Tangodown SSM-03. OPF-M17, ACRO, RSD is compatible with P320 X-Five Legion, Legion Carry, and DP Cut. It is not compatible with P320 Pro Cut, P320 sub compact, AXG, and RX. OPF-M17-ACRO, RSD is shipped with two M4 0.7mm x 6mm (torque value: 20 to 25 in·lb), a T20 key, and a packet of VC-3. Proudly designed and made in the USA. ATTENTION: Steiner MPS users: MPS's recoil lug underneath the sight may vary in width and be slightly wider than that of the ACRO. Should this be the case, firmly push the MPS on the plate, or gently tap on the sight until the MPS fully seats. For the new M17/M18 and SIG P320 with the Delta Point Pro cut, Forward Controls Design is proud to offer OPF-M17, ACRO, RSD (rear sight dovetail).
Laadukas optiikkakannatin M17/M18 - täydellinen valinta ammattilaisille!
FORWARD CONTROLS DESIGNin OPF-M17, ACRO, RSD on tarkkuusjyrsitty 4140 teräksestä ja QPQ-pinnoitettu. Aimpoint ACRO P1/P2 vaatii, että kannattimien on noudatettava Aimpoint ACRO TDP:tä tiukkojen toleranssien kanssa. OPF-M17, ACRO, RSD on osoittautunut parhaaksi valinnaksi ammattikäyttäjien keskuudessa.
OPF-M17, ACRO, RSD on yhteensopiva MIL:in myöntämien M17/M18 -mallien kanssa. Se on helppo asentaa erinomaisten Aimpoint ACRO -näköpiirien käyttöön. Tämä malli on identtinen Tangodown SSM-03:n kanssa.
Lisäksi OPF-M17, ACRO, RSD on yhteensopiva P320 X-Five Legion, Legion Carry ja DP Cut -malleihin. Huomioithan, että se ei ole yhteensopiva P320 Pro Cut, P320 sub compact, AXG ja RX -mallien kanssa.
OPF-M17-ACRO, RSD toimitetaan kahden M4 0.7mm x 6mm -ruuvin (momenttiarvo: 20–25 in·lb), T20-avaimen ja VC-3-paketin kanssa. Tuote on ylpeästi suunniteltu ja valmistettu Yhdysvalloissa.
HUOMIO: Steiner MPS -käyttäjät: MPS:n takaisiniskuluku voi vaihdella leveydeltään ja olla hieman leveämpi kuin ACRO. Jos näin on, paina MPS:tä lujasti kannattimen päälle tai napauta kevyesti näköpiiriä, kunnes MPS istuu kunnolla.
Uuden M17/M18:n ja SIG P320:n Delta Point Pro -leikkauksen kanssa Forward Controls Design on ylpeä voidessaan tarjota OPF-M17, ACRO, RSD (takana oleva näköpiirin dovetail).